The Little Milkman that Delivers
I design amps based on my own experience and needs, and when it came time to design the Creamer, I wanted to find a balance between a perfectly voiced guitar tone with a fair amount of power and portability. Everyone loves low power vintage amplifiers, but sometimes I need a bit more power, reliability, and headroom on the gig. In studio, the Creamer is virtually silent when idle. Its the ultimate refinement and alternative to the vintage small format amplifier.
I wanted the Creamer to be very versatile so I included an adjustable cathode bias circuit so that the user can easily substitute 6L6 or 6V6 output tubes with no need to rebias the output tubes. I have added a rear mounted switch to maintain an 8ohm speaker output regardless of which tube type used. Inside of the chassis, you will find an internal bias adjustment in case you want to fine tune the cathode bias when substituting in vintage tubes which tend to draw more current.
With 6V6 the Creamer puts out about 20 watts into 8ohms and has sweet breakup. Put a pair of 6L6s in, flip the switch on the rear panel and you get a bit of more low end, subtler mids, and a touch more headroom.
The tremolo circuit in the Creamer is unique and sounds outstanding. It is harmonically rich, deep, and has a very useful range of speed.
Like all Milkman amplifiers, the Creamer is built using the finest possible components onto a turret board, and is hand wired with cloth covered wire.
18-22W Class AB - Cathode Biased
12” Alnico Jupiter Speaker, 8 ohm
Jupiter Alnico 12" has a classic American alnico magnet sound. A bit less transparent in the upper midrange, this speaker adds a "woody" tone to the Creamer. Its still lively on top, and a bit more focused in the bass response than its ceramic magnet brother. The speaker starts to break up and add alnico character as the amp is pushed.
Tube tremolo and spring reverb
Includes handwired original design detachable footswitch and 15' cable
DIMENSIONS & WEIGHT
19-7/8" W x 16" H x 9-1/2" D 32lbs